No Products in the Cart
FREE SHIPPING ABOVE €100 IN THE NETHERLANDS
Legacy Stick-N-Washaway is a washaway embroidery stabilizer that you can even directly print your design onto. This unique product combines a pressure sensitive adhesive with a water-soluble stabilizer. The stabilizer will wash away without placing any stress on threadwork and leaves no trace on either side of the project.
It is ideal for printed design work and custom embroidery and has also been used as a method for small block piecing for quilts.
Available only in white, in a width of 48cm.
PROCESSING STICK-N-WASHAWAY
Place a piece of Stick-N-Washaway under the fabric and hoop them together in an embroidery frame. Embroider the desired design by hand or sewing/embroidery machine. Dissolve the stabilizer afterwards in cold or lukewarm water - no residue remains.
PRINTING DIRECTIONS
1. Cut a A4 size sheet and place Stick-N-Washaway into printer tray or feeder, so that print will appear on the stabilizer side of the sheet.
2. Print desired design on the Stick-N-Washaway sheet using a light or draft setting the inkjet or laser printer.
3. After printing is complete and the ink has dried, peel off the backing paper and finger press the printed design in desired location. Stick-N-Washaway is repositionable for easy handling.
4. Stitch by machine or hand along printed lines.
5. When stitching is complete, cut away excess. Immerse project with remaining Stick-N-Washaway in lukewarm water to completely remove any trace of stabilizer.
Note: Stick-N-Washaway is compatible with most inkjet or laser printers. Since printers and ink vary, we recommend that you do a test piece to confirm that your ink will not bleed, and that it completely washes out along with the Stick-N-Washaway™. If the ink in your printer or copier bleeds, try using a different machine. You may want to feed one sheet of Stick-N-Washaway at a time through your printer’s manual feed or bypass tray to prevent jamming.
